Bullet-proof Vest Logo

Pistol Bullet    Armor UP L.P. dba         

Bullet Proof ME Body Armor

Bulletproof Vests, Plates, Helmets & Armor to
Put the Odds in YOUR favor


Helmet Sizing

Measure the circumference around your forehead with a cloth tape measure
(or a belt and a ruler).

Be sure to measure:

  • SNUGLY - pull that tape measure snug !
  • above the eyebrow ridge
  • head up straight, and
  • keep the tape measure horizontal, i.e., roughly parallel to the ground
  • take the widest forehead circumference measurement you get when the tape is SNUG.
  • it helps to look in the mirror to check your measuring
SIZING NOTE:

When you first try it on, helmet with blunt trauma pads will probably feel tight if the pads are cold.  See the instruction booklet for pad placement ideas, and try on with different pad setups.  Then wear it for a few hours to let the pads warm up and conform to your head.  

Everyones' head is different - you may have a wide head side to side, or a long head front to back (or vice versa). If needed you can customize with 0.5" pads, or 1" thick pads instead of the standard 0.75" thick.


ACH Cut Sizing

Size
Head
Circumference

APPROXIMATE
Hat Size

Rough Sizing for Group Orders - Individuals Must Measure Circumference

Small
up to 21.5"
(55 cm.)
up to 6 7/8"
Medium
up to 22.25"
(56.5 cm.)
7" - 7 1/8"
Large
up to 23.25"
(59 cm.)
7 1/4" - 7 3/8"
XL
23.25" & up
(59 cm. and up)
7 1/2" and up


SWAT / Special Forces

Size
Head
Circumference

APPROXIMATE
Hat Size

Rough Sizing for Group Orders - Individuals Must Measure Circumference

Medium
Under 23.0"
(58.4 cm.)
up to 7 1/4"
Large
Over 23.0"
(58.4 cm.)
7 3/8" and up


Combat and Gunfighter Sizing

Size
Head
Circumference

APPROXIMATE
Hat Size

Rough Sizing for Group Orders - Individuals Must Measure Circumference

Small - SPECIAL ORDER
up to 22"
(56 cm.)
up to 6 7/8"
Medium
up to 22.5"
(57.2 cm.)
7 - 7 1/8"
Large
up to 23.5"
(59.7 cm.)
7 1/4" - 7 1/2"
XL
23.5" & up
(59.7 cm. and up)
7 5/8" and up

NOTE:
Helmet fit is fine-tuned by adjustment of the blunt trauma pads inside the helmet (attached with Velcro).
You can also adjust the fit up or down a size by using thinner (0.5") or thicker (1.0") blunt trauma pads instead of the standard 0.75" thick pads.
Related Pages:

Put the odds in YOUR favor...


Complete Product LIST


»  CONTACT US  «

ArmorUP L.P. dba BulletProofME Body Armor, 6705 Highway 290 West, Suite 502, Austin, Texas 78735

– Please call for an appointment before visiting –


This site © 1999 - 2014 Bullet Proof ME.com
Copyright Notice    •    Legal Terms of Sale and Website Use
Bullet Photos © Winchester Ammunition