Bullet-proof Vest Logo

Pistol Bullet    Armor UP L.P. dba         

Bullet Proof ME Body Armor

Bulletproof Vests, Plates, Helmets & Armor to
Put the Odds in YOUR favor


Tactical Body Armor

Pro-tection to the MAX


Ballistics 100% Made in the USA

 

ProMAX MOLLE Tactical  Carrier
PHOTO page

ProMAX Tactical
Details below

  • Side Opening Torso Protection

  • Customized fitting for superb ergonomics

  • Lots more Level III-A body coverage vs. just a Rifle Plates Carrier

  • 2 Pull Velcro quick release on shoulder and side

Interceptor / OTV - Front
PHOTO Gallery Page

ProMAX Interceptor OTV - NIJ Level III-A

Details below

  • Front Opening Torso Protection

  • Extensive coverage: Torso, Neck, Over-the-Shoulder and Groin

 

The mil-spec pattern to fit:

...and many other vests
Protects the upper arm and, even more importantly, the
shoulder and armpit gap.

Too Many Choices?

Just get your measurements and CALL US!


We are happy to explain the pros and cons of the options.

Accessories for Tactical Vests - Related Pages

When comparing weights - please be aware that we quote ACTUAL weights for a normal size Large vest, ready to wear.

We do NOT play the artificial "weight loss" games you may encounter elsewhere, such as quoting the weight of an Small, Short, WITHOUT an outershell carrier.

We recommed buying a vest based on weight AND coverage area, not just weight.


Our Body Armor craftsmen and women have been making vests for many years...

Vests that have saved the lives of police officers, and American troops in combat...

Pistol Bullet  Superb workmanship, without unneeded marketing glitz.

  • Our tactical designs have been used by U.S. Army, U.S. Marine Corps, SOCOM (Special Forces), U.S. Defense Supply Agency, U.S. Coast Guard, U.S. Air Force & many other U.S. Agencies.

  • We use the aramid fibers Du Pont Kevlar® and Twaron® for reliability and flexibility / comfort.

  • When you receive your vest you will see the quality of the workmanship. We stand behind our quality with both a 5-Year Manufacturer Warranty plus a Satisfaction Guarantee

Made in the USA

ProMAX Tactical

ProMAX MOLLE Tactical  Carrier
Coyote Shown
PHOTO page

Customized fitting in an highly ergonomic Tactical vest.

  • Rifle Plate pockets, and lots of MOLLE real estate

  • we can fit you in 2" increments to your torso, and 1" increments to your height - for shorter or taller folks this is critical for optimum coverage and comfort

  • Very quick to drop in an emergency - just one Fastex buckle and 2 Velcro pulls. Can be dropped with one hand.

  • Add optional Rifle Plates to achieve Level III rifle protection and Level IV armor-piercing rifle protection on the Chest and Back. Rifle Plates sold separately.

  • Transforms into a concealable style vest as needed with the optional Polyester/Cotton carrier for more comfort wearing under clothes.

  • Tough 1,000 Denier Cordura® nylon carrier, with many color choices, all coated for waterproofing.

  • Allows side Rifle Plate pouches to be added as well as Front & Back Rifle Plates.

Popular Sizes In Stock in Coyote & Black & MULTICAM
(other Colors Made-to-Order in 4 to 6 weeks)

ProMAX Tactical

 

Color Choices




Made in the USA

 

 

Rifle Plates  sold separately










Standard Aramid
Certified NIJ 0101.05

8.6 mm Thick

$ 510

(Add $ 50 per oversize increment)

Premium Aramid
Certified NIJ 0101.05

7.5 mm

$ 660

(Add $ 60 per oversize increment)

Ultra-thin Hybrid
Certified NIJ 0101.06

6.4 mm

$ 775

(Certified for the brutal NIJ 0101.06 test protocol - similar to tumbling 24/7 in a dryer for over a week straight!)

(Add $ 60 per oversize increment)
Groin Protector
  • Level III-A

  • attaches with MOLLE to the belly of the ProMAX Tactical or other vests with MOLLE

  • 12.5" wide by 11" tall with clipped corners (32 by 28 cm.)

Premium Aramid
7.5 mm

$ 140
Butt Protector
  • Level III-A

  • attaches with MOLLE to the back of the ProMAX Tactical or other vests with MOLLE

  • 12" wide by 12" tall rectangle (30.5 by 30.5 cm.)

 

Premium Aramid
7.5 mm

$ 140

(Add $ 5 for MULTICAM)

Collars & Throat Protectors
  • Level III-A

  • attaches with Velcro

  • Must be ordered with your vest - cannot be retro-fitted

Premium Aramid
7.5 mm

$ 130

ProMAX Tactical Extra Carrier

An extra in a different color, or in the same color, so you can set up a rig for a different mission.

$ 160

(Add $ 10 per oversize increment)

Slick Rifle Plate Pockets Outershell

No MOLLE webbing in a slick carrier. Great to wear concealed under a jacket, or when you have a dedicated MOLLE load bearing vest.

$ 110

(Add $ 5 per oversize increment)

Concealable Vest Outershell

An extra carrier so your ProMAX Tactical vest can do double duty as a concealable vest. Durable Polyester/Cotton with a Sweat-Wicking mesh inner.

$ 80




Be sure to measure OVER clothing that will be worn under the vest!

ProMAX Interceptor OTV in Level III-A

Interceptor / OTV - Front
Coyote Shown
PHOTO Gallery Page

    • Front-opening convenience makes it super-fast to get on - the ideal quick reaction vest.

    • Does not have to go over your head - just slips on like a jacket, and close the Velcro flap on the front.

    • Extended coverage vs. most Tactical vests - lower on the belly, and no gap at the top of the shoulder.

    • Add optional Rifle Plates to achieve Level III , mil-spec SAPI, E-SAPI, or Level IV rifle protection on the Chest and Back. Rifle Plates sold separately.

    • MOLLE web strips cover the front and back

    • Torso only, or complete system includes:
      • Vest with torso coverage and Rifle Plate Pockets
      • Detachable Level 3-A Collars attached with a padded (non-ballistic) shoulder yoke
      • Detachable Level 3-A Front Throat Protector
      • Detachable Level 3-A Groin Protector

    • Easily Customizable – add or remove the the Front Throat Protector, the Collar/Over-the-Shoulder Protection, or the Groin Protector components as desired.
Customizable – add or remove the the Front Throat Protector, the Collar, or the Groin Protector components as desired.

In-Stock
Contract Overrun, Brand-New condition
$ 440 Introductory Special for Torso-Only Vest


ProMAX New Production Below

Made-to-order, and shipped in 3 to 6 weeks.


Level III-A

Weight: Size Large ~ 11.7 lbs. / 5.3 kg.
in Aramid Kevlar / Twaron


Color Choices



Made in the USA
8.6 mm Thick

Standard Aramid

$ 880  XS / S / M / L
$ 970   XL
$ 1,060 XXL
$ 1,150   3-XL

7.5 mm Thick

Premium Aramid

$ 1,260   XS / S / M / L
$ 1,380   XL

Ballistic Panels - TORSO ONLY

(No Carrier)

Level III-A

Front Right , Front Left, and Back (no Groin or Neck protection)



Made in the USA

8.6 mm Thick

Standard Aramid

$ 680   XS / S / M / L

$ 740   XL

7.5 mm Thick

Premium Aramid

$ 830   XS / S / M / L

$ 910   XL

Spare Outershell Carriers

1000 Denier Cordura® Nylon - tougher than mil-spec!

Color Choices

MULTICAM MULTICAM®
Add $15

Complete Carrier

Everything but the Torso and Groin Ballistic Panels

Covers the entire vest, including the Level III-A Collar and Throat inserts.

You will need to insert your ballistic panels in the Torso and Groin.

$ 350

Torso ONLY

No neck or throat components, You will need to insert your ballistic panels in the Torso and Groin, and add your Throat, Collar / Shoulder Yoke assembly.

$ 230
Torso Only


$ 270
with Groin Protector

Add 10% for XL and up


We have some Components available,
e.g., Neck, Groin Protector, Carrier, etc., etc. – CALL US

Interceptor OTV

Sizing
Chest Measurements
OVER CLOTHING
Belly Measurement
OVER CLOTHING

(for a Full-Side-Wrap)
Front Centerline Height

Weight

Approximate

Small (S)
Up to 37"
(94 cm.)
Up to 38"
(97 cm.)
~ 16" (41 cm.)
~ 8 lbs
( 3.6 kg.)
Medium (M)
Up to 41"
(104 cm.)
Up to 43"
(102 cm.)
~ 17" (43 cm.)
~ 9.5 lbs.
(4.3 kg.)
Large (L)
Up to 45"
(114 cm.)
Up to 45"
(117 cm.)
~ 18" (46 cm.)
~ 10.25 lbs.
(4.7 kg.)
Extra-Large (XL)
Up to 49"
(124 cm.)
Up to 50"
(127 cm.)
~ 19" (48 cm.)
~ 12 lbs.
(5.5 kg.)
XXL
Up to 53"
(135 cm.)
Up to 54"
(137 cm.)
~ 20" (51 cm.)
~ 14 lbs.
(6.4 kg.)
3-XL
Up to 57"
(145 cm.)
Up to 58"
(147 cm.)
~ 21 " (53 cm.)
~ 16 lbs.
(6.4 kg.)


Be sure to measure OVER clothing that will be worn under the vest!

Accessory Components


Made in the USA

Groin Protector - Mil Spec Ballistics

Small / Medium
or
Large / XL

$ 120

Throat Protector Level 3-A

One size for all.

$ 50
Collar / Shoulder Yoke Level 3-A

Does not include Throat Protector

NOTE: Collars are 3-A ballistic protection, the shoulder portion is non-ballistic foam padding.
$ 130

Camo Outershell Carrier

An extra carrier is a great investment if you rip your vest hopping barbed wire, etc., etc. ... or just want to have another color option.

We have an overstock of Camo outershells from a military contract overrun, so we are providing these Brand-New carriers at a give-away price.

Just the torso carrier - no neck accessory components or ballistic material. Thus your vest would keep the same color on the Throat and collars that you have now.

These carriers are also great for paintball vests, or a load bearing vest (the back Rifle Plate Pocket is a super-sized hydration pouch).

3-Color DESERT Camo in Small and XL only (sorry no other sizes)

$ 35

Overstock Special

Torso & Groin Only

(Limited to Stock on Hand)


PHOTO

ProMAX BALCS / SPEAR Ballistic Inserts

BALCS / SPEAR

Level III-A  Ballistic Panels

NO Outershell Carrier, Ballistic Panels Only

 


Made in the USA
7.3 lb. Lg.
Standard Aramid
Compliant with NIJ 0101.06

8.5 mm
$ 440

5.5 lb. Md.

6.5 lb. Lg.
Standard Aramid
Certified NIJ 0101.05

8.6 mm Thick
$ 440
($ 480 XL)

4.6 lb. Md.

5.6 lb. Lg.
Premium Aramid
Certified NIJ 0101.05


7.5 mm
$ 550
($ 590 XL)

4.6 lb. Md.

5.5 lb. Lg.
Ultra-thin Hybrid
Certified NIJ 0101.06

6.4 mm

(Certified for the brutal NIJ 0101.06 test protocol - similar to tumbling 24/7 in a dryer for over a week straight!)
$ 630
($ 670 XL)


Sizing Conforms to the Mil-Spec for BALCS

Note - the BALCS pattern runs very generous in the belly, and narrow on the chest.

BALCS
Sizing

Belly Measurement
for a Full-Side-Wrap

Front Centerline Height

(Bottom of Neck Scoop to the bottom of the vest)

Chest Width

(At Nipples, between armpits)
Small (S)
Up to 37" (94 cm.)

( Flat, belly measures 39" )
~ 13" (33 cm.)
~8.5" (21.5 cm.)
Medium (M)
Up to 41" (104 cm.)

( Flat, belly measures 43" )
~ 14" (35.5 cm.)
~9.6" (24.5 cm.)
Large (L)
Up to 45" / (114 cm.)

( Flat, belly measures 49" )
~ 15" (38 cm.)
~10.8" / (27 cm.)
Extra-Large (XL)
Up to 49" (124 cm.)

( Flat, belly measures 51" )
~ 16" (40.5 cm.)
~12.0" (30.5 cm.)

ProMAX Upper Arm Protectors
& Forearm Protectors

Upper Arm Protectors
PHOTO Gallery Page

Also known as bicep protectors, this modular set plugs your vest's armpit / shoulder gap by adding Velcro-detachable Upper Arm Protection. Covers the Bicep, Tricep and Deltoid in Level III-A protection.

Easily attached to Interceptors / OTVs, and all of our Tactical vests, with a strap to the vest at the shoulder, and elastic/Velcro around the bicep.

Protecting the upper arm is important, but most critical is the fact that you now have good cover for the shoulder and armpit gap that is open by necessity on all vests.

For very exposed positions, e.g., turret gunners, entry teams, etc., etc. we also offer Forearm Protectors which extend from wrist to elbow, and provide very good coverage from wrist to shoulder, when combined with the Upper Arm Protectors. (To maintain flexibility and ease of movement there is a small gap at the elbow.)

Tough Cordura® nylon carrier, with many color choices, all coated for waterproofing:

Upper Arm Protectors Level III-A

  • 10.5" tall by 11" wide (27 X 28 cm.)
  • Weight ~2.5 lbs. (~1.1 kg.)

Color Choices



Made in the USA
Premium Aramid

$ 280

7.5 mm Thick

Forearm Protectors

Level III-A

Weight ~2.25 lbs. (~1.0 kg.)

  • Covers ~70% of the forearm from wrist to elbow (inside of forearm is open for ventilation)

  • Velcro-adjustable positioning to optimize coverage for your arm.


Color Choices



Made in the USA

Premium Aramid

7.5 mm

PHOTO

$ 220
per PAIR

Covers both Right and Left sides

Special Order

Must Specify if Rifle Plate Pockets desired or not

Ultra-light Polyethylene Rifle Plates Upgrade

  • 4" by 9" of rigid Rifle Plate coverage

  • Tested to stop, with LEVEL III-A armor SUPPORTING:
    • .308 FMJ
    • 5.56 X 45mm Ball - M193
      (FMJ but not the SS-109 / M855 with penetrator pin)
    • 7.62 X 39mm Mild Steel Core

  • adds 2.0 lbs. / 0.9 kg per PAIR of Rifle Plate

  • Velcro-adjustable positioning to optimize coverage for your arm

Add $ 460 to Upper Arm Protectors or Forearm Protector prices above

- includes:
Forearm Protectors
AND
Rifle Plates
to cover both Right and Left sides

Related Pages - Accessories for Tactical Vests

See Rifle Plates page

SIDE Rifle Plates

Drop Leg Platform

See Drop Leg page
See Kevlar Helmets page

See Eye Protection page

Put the odds in YOUR favor...


Complete Product LIST


»  CONTACT US  «

ArmorUP L.P. dba BulletProofME Body Armor, 6705 Highway 290 West, Suite 502, Austin, Texas 78735

– Please call for an appointment before visiting –


This site © 1999 - 2017 Bullet Proof ME.com
Copyright Notice    •    Legal Terms of Sale and Website Use
Bullet Photos © Winchester Ammunition